Table of Contents
Advertisement
Chapter 4: AMI BIOS
DeepSx Power Policies
Use this item to configure the Advanced Configuration and Power In-
terface (ACPI) settings for the system. Enable S3 to use Standby Mode
(Suspend-to-RAM) and maintain power supply to the system RAM
when the system is in the sleep mode. Enable S4 to use Hibernation
mode (Suspend to Disk) so that all data stored in of the main memory
can be saved in a non-volatile memory area such as in a hard drive
and then power down the system. Enable S5 to power off the whole
system except the power supply unit (PSU) and keep the power button
"alive" so that the user can "wake-up" the system by using an USB
keyboard or mouse. The options are Disabled, and Enabled in S4-S5.
Wake on LAN Enable
Select Enabled to enable the capabiltiy to 'wake up' the system through
the Ethernet port. The settings are Enabled and Disabled.
Pcie PII SSC
Use this feature to set the PCIE PII SSC percentage. Select Auto to
keep the hardware default with no BIOS override. The range is from
0.0% to 2.0%.
SATA and RST Configuration
4-45
Advertisement
Table of Contents
