Battery Removal And Installation; Battery Removal; Proper Battery Disposal; Battery Installation - Supermicro X9SRW-F User Manual

X9SRW Motherboard Series User's Manual
3-4

Battery Removal and Installation

Battery Removal

To remove the onboard battery, follow the steps below:
1. Power off your system and unplug your power
cable.
2. Locate the onboard battery as shown below.
3. Using a tool such as a pen or a small screwdriver,
push the battery lock outwards to unlock it. Once
unlocked, the battery will pop out from the holder.
4. Remove the battery.

Proper Battery Disposal

Warning! Please handle used batteries
carefully. Do not damage the battery in any
way; a damaged battery may release hazard-
ous materials into the environment. Do not
discard a used battery in the garbage or a
public landfill. Please comply with the regula-
tions set up by your local hazardous waste
management agency to dispose of your used
battery properly.

Battery Installation

1. To install an onboard battery, follow the steps 1&
2 above and continue below:
2. Identify the battery's polarity. The positive (+) side
should be facing up.
3. Insert the battery into the battery holder and push
it down until you hear a click to ensure that the
battery is securely locked.
Important: When replacing a battery, be sure
to only replace it with the same type.
3-6
Battery
Battery
Lock
Battery Holder
This side up
1
Press down until
you hear a click.
2