Usb Configuration; Sata Configuration - Supermicro M11SDV-4C-LN4F User Manual

Super M11SDV-4C/4CT/8C/8CT/8C+-LN4F User's Manual
USB Configuration

USB Configuration

USB Module Version: 20
USB Controllers: 1 XHCI
USB Devices: 2 Keyboards, 1 Mouse, 3 Hubs
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy support
if there are no legacy USB devices present. Select Disable to have all USB devices available
for EFI applications only. The options are Enabled, Disabled, and Auto.
XHCI Hand-off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The options are Enabled and Disabled.
USB Mass Storage Driver Support
Select Enabled for USB mass storage device support. The options are Disabled and Enabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which in turn, will provide complete
legacy USB keyboard support for the operating systems that do not support legacy USB
devices. The options are Disabled and Enabled.

SATA Configuration


When this submenu is selected, the AMI BIOS automatically detects the presence of the
SATA devices that are supported by the Intel PCH chip and displays the following features:
SATA Controller
This feature enables or disables the onboard SATA controller supported by the Intel PCH
chip. The options are Disable, Enable, and Auto.
SATA Hotplug
This feature designates the port specified for hotplugging. Set this feature to Enabled for
hotplugging support, which will allow the user to replace a SATA disk drive without shutting
down the system. The options are Disabled or Enabled.
82