Nic1/Nic2 (Lan1/Lan2); Overheat (Oh)/Fan Fail/Uid Led - Supermicro X9SRW-F User Manual

NIC1/NIC2 (LAN1/LAN2)

The NIC (Network Interface Controller)
LED connection for LAN port 1 is located
on pins 11 and 12 of JF1, and the LED
connection for LAN Port 2 is on Pins 9
and 10. NIC1 LED and NIC2 LED are
2-pin NIC LED headers. Attach NIC LED
cables to NIC1 and NIC2 LED indicators
to display network activities. Refer to the
table on the right for pin definitions.

Overheat (OH)/Fan Fail/UID LED

Connect an LED cable to the Front UID and
OH/Fan Fail connections on pins 7 and 8
of JF1 to display UID (Unit ID) signals or
to provide advanced warnings for chassis
overheat/fan failure. Refer to the table on
the right for pin defi nitions.
A
B
OH/Fan Fail LED
C
20
Ground
X
Power LED
HDD LED
NIC1 LED
NIC2 LED
X
Ground
Ground
2
2-19
Pin Definitions (JF1)
Pin#
9/11
10/12
Pin Definitions (JF1)
Pin#
7
8
OH/Fan Fail Indicator
State
Off
On
Flash-
ing
Pin Definitions (JF1)
Pin#
5
6
19
NMI
X
Vcc
Vcc
Vcc
Vcc
UID LED
X
#3~4
Reset Button
Power Button
#1~2
1
Chapter 2: Installation
LAN1/LAN2 LED
Definition
Vcc
Ground
OH/Fan Fail LED
Definition
Vcc/Blue UID LED
OH/Fan Fail LED
Status
Definition
Normal
Overheat
Fan Fail
PWR Fail LED
Definition
Vcc
Ground
A. NIC1 LED
B. NIC2 LED
C. OH/Fan Fail/UID LED