Pch Sata Configuration - Supermicro X11DPU-Z+ User Manual

Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support, which in turn, will provide complete
legacy USB keyboard support for the operating systems that do not support legacy USB
devices. The options are Disabled and Enabled.
Server ME (Management Engine) Configuration

This feature displays the following General ME Configuration settings.
Operational Firmware Version
Backup Firmware Version
Recovery Firmware Version
ME Firmware Status #1
ME Firmware Status #2
Current State
Error Code

PCH SATA Configuration


When this submenu is selected, the AMI BIOS automatically detects the presence of the SATA
devices that are supported by the Intel PCH chip and displays the following items:
SATA Controller
This item enables or disables the onboard SATA controller supported by the Intel PCH chip.
The options are Disable and Enable.
Configure SATA as (Available when the item above: SATA Controller is set to
enabled)
Select AHCI to configure a SATA drive specified by the user as an AHCI drive. Select RAID
to configure a SATA drive specified by the user as a RAID drive. The options are AHCI and
RAID. (Note: This item is hidden when the sSATA Controller is Disabled.)
SATA HDD Unlock
Select Enable to unlock SATA HDD password in the OS. The options are Disable and Enable.
Aggressive Link Power Management
When this item is set to Enabled, the SATA AHCI controller manages the power use of the
SATA link. The controller will put the link in a low power mode during an extended period of
I/O inactivity, and will return the link to an active state when I/O activity resumes. The options
are Disable and Enable.
93
Chapter 4: BIOS