Ethernet Ports; Serial Port; Video (Vga/Crt) Connector - Supermicro X9SRW-F User Manual

X9SRW Motherboard Series User's Manual

Ethernet Ports

Two Ethernet ports (LAN1/LAN2) are
located next to the VGA port on the
I/O Backpanel. In addition, an IPMI
Dedicated LAN is also located above
USB 0/1 ports to provide a dedicated
network connection for IPMI 2.0. These
ports accept RJ45 type cables. Please
refer to the LED Indicator Section for
LAN LED information.

Serial Port

A Serial Port (COM1) is located on
the I/O backpanel. This allows serial
communication connections between
the motherboard and compatible serial
devices. See the table on the right for
pin definitions.

Video (VGA/CRT) Connector

A Video (VGA/CRT) connector is
located on the I/O backpanel. This
connector is used to provide video and
CRT display. Refer to the board layout
below for the location.
1. COM1
2. IPMI LAN
3. LAN1
4. LAN2
5. VGA
1
2
2-16
LAN Ports
Pin Definition
Pin# Definition
1 TD0- 10
2 TD0+ 11
3 TD1- 12
4 TD1+ 13
5 TD2- 14
6 TD2+ 15
7 TD3- 16
8 TD3+ 17
9 P2V5SB 88
(NC: No Connection)
Serial Port Pin Definitions
(COM1)
Pin # Definition
1 DCD
2 RXD
3 TXD
4 DTR
5 Ground
VGA
Pin Definitions
Pin# Definition Pin#
1 Red 10
2 Green 11
3 Blue 12
4 NC 13
5 Ground 14
6 Ground 15
7 Ground 16
8 Ground 17
9 5V
NC= No Connection
3 4
SGND
P3V3SB
Act LED
Link 100 LED
(Green, +3V3SB)
Link 1000 LED
(Yellow, +3V3SB)
Ground
Ground
Ground
Ground
Pin # Definition
6 DSR
7 RTS
8 CTS
9 RI
10 NC
Definition
Ground
NC
MS1: SDA (DDC Data)
HSYNC
VSYSNC
MS3: SCL (DDC CLK)
Case
Case
5