Com 1/Sol; Serial Port Console Redirection; Console Redirection - Supermicro X9SRW-F User Manual

Change Settings
This option specifies the base I/O port address and the Interrupt Request address
of the serial port. The options for Serial Port 2 are listed below.
Auto,
IO=3F8h; IRQ=4;
IO=3F8h; IRQ=3;
IO=2F8h; IRQ=3;
IO=3E8h; IRQ=5;
IO=2E8h; IRQ=7;
IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
Device Mode
Use this feature to select the desired mode for a serial port specified. The options
are Normal and High Speed.
Serial Port 2 Attribute
This feature allows the user to set the serial port mode for Console Redirection.
The options are SOL and COM.

Serial Port Console Redirection


These submenus allow the user to configure the following Console Redirection
settings for a COM Port 0 or COM Port 1 as specified by the user.

COM 1/SOL

Console Redirection

Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. (The default setting for COM1 is Disabled,
and for SOL is Enabled.)
4-15
Chapter 4: AMI BIOS