Reset Button; Power Button - Supermicro X9SRW-F User Manual

X9SRW Motherboard Series User's Manual

Reset Button

The Reset Button connection is located
on pins 3 and 4 of JF1. Attach this to a
hardware reset switch on the computer
case to reset the system. Refer to the
table on the right for pin definitions.

Power Button

The Power Button connection is located
on pins1 and 2 of JF1. Momentarily con-
tacting both pins will power on/off the sys-
tem. This button can also be configured
to function as a suspend button (with a
setting in the BIOS - see Chapter 4). To
turn off the power in the suspend mode,
press the button for at least 4 seconds.
Refer to the table on the right for pin
definitions.
Power LED
OH/Fan Fail LED
20
Ground
X
HDD LED
NIC1 LED
NIC2 LED
X
Ground
Ground
2
2-20
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
Power Button
Pin Definitions (JF1)
Pin# Definition
1 Signal
2 +3V Standby
A. Reset Button
B. PWR Button
19
NMI
X
Vcc
Vcc
Vcc
Vcc
UID LED
X
#3~4
Reset Button
Power Button
#1~2
1
A
B