Dimm Configuration - Supermicro X9SRW-F User Manual

IOU1-PCIe Port
This feature allows the user to set the PCI-Exp bus speed between IOU1 and
PCI-e port. The options are x4x4 and x8.
SXB2 PCI-E 3.0 x8 Link Speed
This feature enables the user to select the target link speed for this slot. The
options are GEN1 and GEN2.
IOU2 - PCIe Port
This feature allows the user to set the PCI-Exp bus speed between IOU2 and
PCIe port. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, and x16, and Auto.
IOU3 - PCIe Port
This feature allows the user to set the PCI-Exp bus speed between IOU3 and
PCIe port. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, and x16, and Auto.

DIMM Configuration


Memory Configuration
This section displays memory status such as Current Memory Mode, Memory
Speed, Mirroring and Sparing information.
DIMM Information

This feature displays information regarding the installed memory.
Memory Mode
The only option is Independent, a feature that allows for all DIMMs to be avail-
able to the operating system.
DRAM RAPL Mode
RAPL which stands for Running Average Power Limit is a feature that provides
mechanisms to enforce power consumption limits on supported processors The
options are DRAM RAPL MODE0 , DRAM RAPL MODE1, and Disabled.
DDR Speed
Use this option to force the system memory to run at a different frequency than
the default frequency. The available options are Auto, Force DDR-800, Force
DDR-1066, Force DDR-1333, Force DDR3-1600 and Force SPD.
Channel Interleaving
This feature selects from the different channel memory interleaving methods.
The options are Auto, 1 Way, 2 Way, 3 Way and 4 Way.
4-9
Chapter 4: AMI BIOS