D" Group: Monitoring Functions; Parameter Monitoring Functions - Hitachi SJ300 Series Instruction Manual

3–6

"D" Group: Monitoring Functions

"D" Group: Monitoring Functions
Parameter
Monitoring
Functions
Func.
Name
Code
D001 Output frequency monitor Real-time display of output
D002 Output current monitor
D003 Rotation direction
monitor
D004 Process variable (PV),
PID feedback monitor
D005 Intelligent input terminal
status
D006 Intelligent output terminal
status
D007 Scaled output frequency
monitor
D012 Torque monitor
D013 Output voltage monitor
You can access important system parameter values with the "D" Group monitoring functions,
whether the inverter is in Run Mode or Stop Mode. After selecting the function code number
for the parameter you want to monitor, press the Function key once to show the value on the
display. In Functions D005 and D006 the intelligent terminals use individual segments of the
display to show ON/OFF status.
"D" Function
Description
frequency to motor, from 0.0 to
400.0 Hz
Filtered display of output current
to motor (100 mS internal filter
time constant)
Three different indications:
"F". Forward
"o". Stop
"r" Reverse
Displays the scaled PID process
variable (feedback) value (A75 is
scale factor)
Displays the state of the intelligent
input terminals:
8 7
6 5 4
FW
Terminal numbers
Displays the state of the intelligent
output terminals:
AL 15 14
Terminal numbers
Displays the output frequency
scaled by the constant in B86.
Decimal point indicates range:
XX.XX 0.00 to 99.99
XXX.X 100.0 to 999.9
XXXX. 1000 to 9999
XXXX 10000 to 99990
Estimated output torque value,
range is -300.0 to +300.0%
Voltage of output to motor,
range is 0.0 to 600.0V
Run
Mode
and Units
Edit
—
400.0 Hz
—
—
—
—
ON
OFF
3 2 1
—
ON
OFF
12 11
13
—
—
—
Range
SRW Display
0.0 to FM 0000.00Hz
A Iout 0000.0A
— Dir
— PID-FB 0000.00%
— IN-TM LLLLLLLLL
— OUT-TM LLLLLL
User- F-CNV 000000.00
defined
%
TRQ +000%
VAC Vout 000.0V
STOP