Upgrading The Ck3 Using Smartsystems Foundation - Intermec CK3n User Manual

Upgrading the CK3 Using SmartSystems Foundation

CK3 Mobile Computer User's Manual
9 Remove the microSD card and delete the files.
10 Set the date, time, and network communication parameters to
reestablish communications with the other devices in the wireless
network.
You can use the SmartSystems console to upgrade the operating
system on your CK3. The console is part of SmartSystems Foundation
and is available from the Intermec web site through the Intermec
Developer Library (IDL). Before you can upgrade your CK3, you need:
• SmartSystems Foundation. To download SmartSystems
Foundation, go to
Management page.
• the device upgrade .exe file. This file is available from the Intermec
web site at www.intermec.com. Go to Support > Downloads.
Make sure the file you select is for your language.
To upgrade the computer using SmartSystems Foundation
1 Install SmartSystems Foundation on your PC and open the
SmartSystems console.
2 Make sure the SmartSystems console and CK3 are on the same
subnet.
3 Make sure your CK3 is either in a communications dock or
charging dock or that power management is disabled.
4 Download the device upgrade .exe file to your PC.
5 Double-click the .exe file on your PC. An InstallShield application
starts and walks you through the process of extracting the
upgrade files to the default location.
Note: Do not change the default location where InstallShield
extracts the files. The SmartSystems console requires the files to
be in this location.
6 From the SmartSystems console, locate the device upgrade to
install.
Chapter 3 — Developing and Installing Applications
www.intermec.com/idl and open the Device
63