Connecting The Cs40 To A Wireless Printer - Intermec CS40 User Manual

Hide thumbs Also See for CS40:

Table of Contents

Chapter 2 — Connecting and Configuring the CS40

Connecting the CS40 to a Wireless Printer

To turn on the Bluetooth radio

1 Tap Start > Settings > Bluetooth > Mode.

2 Tap the Turn on Bluetooth check box.

3 (Optional) If you want your CS40 to be visible to other Bluetooth

devices, tap Make this device visible to other devices.

4 Tap ok.

The Bluetooth radio maintains its current state through a warm or

cold boot and maintains virtual COM ports. If you clean boot your v,

you need to recreate pairings to devices.

To configure your CS40 for Bluetooth wireless printing, you need to:

•

make sure Bluetooth power is on. For help, see the procedure in

"Connecting the CS40 Using Bluetooth Communications" on

page 27.

•

create an application that opens the wireless printing COM port

on your CS40. For help, see the Bluetooth Resource Kit, which is

part of the Intermec Developer Library (IDL), available from the

Intermec web site at www.intermec.com/idl.

•

select the current wireless printer on your CS40. For help, see the

next procedure.

CS40 Mobile Computer User's Manual

Table of Contents