Installing The Batteries In The Remote Control - Strong SRT 5429 User Manual

High definition digital terrestrial receiver
Table of Contents

Advertisement

16.
To fast forward in a movie or music track
17.
To go to the end of a movie or music
track, or show the next photo
18. MUTE: To turn the sound on or off
19. FORMAT: To cycle through the video definitions:
576i, 576p, 720p and 1080i
20 . BACK: To return to the previous channel or
station
21. EXIT: To close the current menu and return to
normal viewing
22.
( / )
▲ ▼ : To change the channel, or to move the
cursor up or down in a menu
23. . VOL (
/
): To change the volume in viewing
mode, or to change an option or setting in a menu

Installing the batteries in the remote control

1. Press down on the retaining catch on the lid of the battery recess on the remote control and remove
the lid.
2. Insert two AAA batteries into the recess.
Be careful to insert the batteries as shown in the diagram inside the recess.
3. Replace the lid over the recess and gently push down on the lid until it snaps firmly into place.
24.TIMER:To access timer menu directly.
25. INFO: To show information about the
current program
26. ASPECT: To cycle through the aspect
ratios: 16:9 and 4:3
27.STOP: To stop a movie or music track, or to
stop recording a movie
28.
To start recording a movie
/ /
29.
To start or pause a movie or music
track
30.
To go to the end of a movie or music
track, or show the next photo
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srt 5429a

Table of Contents