Table of Contents
Advertisement
Copy
Inserting a document
There are two ways to copy a document: You
can place it onto the scanner glass (fl atbed
scanner) directly or load it into the automatic
document feeder.
Flatbed scanner
1 Open the fl atbed scanner cover. Please
make sure that the scanner glass is clean
before placing the original.
2 Place the document face down onto the
glass.
3 Align it with back left corner of the scanner
(marked with arrows).
If you want to scan small three-dimensional ob-
jects (such as coins or fl owers), use transparent
fi lm to protect the scanner glass.
16
Automatic feeder
Place the document face up into the docu-
ment feeder (up to 10 pages on 60–90 g/m²
paper).
If you are working with originals of an odd size
or photos, please use the fl at-bed scanner.
A5 size documents should be inserted land-
scape.
The following points are the most common
causes of problems when inserting docu-
ments into the feeder. Do not insert ...
•
pages that are smaller than A5.
•
pages from newspapers (printer's ink).
•
stapled pages or pages with paper clips.
•
creased or torn pages.
•
wet pages or pages with corrections
made with correction fl uid; dirty pages
or pages with a glossy or laminated sur-
face.
•
pages joined with sticky tape or glue, with
adhesive stickers such as "post-it
or pages which are too thin or too thick.
Standard copy K
1 Insert a document (see above).
2 Choose one of the K keys (copying in colour
or black and white) and press it twice.
"Creative" copy K
1 Insert a document (see above).
2 Press one of the K keys (copying in col-
our or black and white) once. You can now
make the following settings:
3 Enter the desired number of copies and
press OK.
4 The copying quality of the MFJ Pro 321 is
higher than the resolutions used for fax
transmission. Use / or f%F to choose
the resolution:
FAST—for good quality documents, without
drawings or small details
10
®
" notes,
NUMBER OF COPIES
RESOLUTION
Advertisement
Table of Contents
