Table of Contents
Advertisement
Hints & tips
Paper feed
In case of a paper jam, try to pull out the paper.
If this is not possible, press M, 74 and OK to
eject the paper.
If a document is not drawn in correctly by the
automatic feeder, press the button on the scan-
ner cover and open the scanner cover.
Press the small lever and carefully remove the
document.
Vertical stripes
If your MFJ Pro 321 makes vertical stripes
when copying, scanning or faxing, the scanner
class might be dirty.
Horizontal stripes
When your MFJ Pro 321 makes horizontal
stripes when copying, scanning or faxing, the
scanner might be locked.
1 Open the printer cover.
2 Unlock the scanner with the lever on the un-
derside of the printer cover and close the
machine.
The machine doesn't print
If your MF-jet doesn't print correctly, the reason
might be that the protective strips were not re-
moved completely from the printing cartridge.
Open the printer cover and remove the cartridg-
es. Remove fi lm residue, replace the cartridges
and close the machine.
Manual call
If sending a fax fails, you can check the line by
using the manual call function.
1 Insert a document.
2 Press M, 35 and OK. The built-in loud-
speaker will be turned on and you should
hear the dial tone.
3 Dial the desired number and press Y. You
will be able to hear how the connection is
established.
Before you call the technical service
If you can't solve your problem with the propos-
als above, please unplug your MF-jet from the
mains and reconnect it after a few minutes.
Ordering information
You can order original cartridges directly by call-
ing 0800 358 08 07.
Change cartridges
The display will indicate if one of the cartridges
is empty.
Please use only original PHILIPS ink cartridg-
es!
1 Open the machine by pulling the lever under
the control panel.
2 The position of the cartridge holder will show
you which cartridge needs to be replaced.
The arrows point to the cartridge that is emp-
ty:
23
Advertisement
Table of Contents
