Lock; Care And Maintenance - Sagem MF J PRO 321 Instructions For Use Manual

Table of Contents

Advertisement

Immediate transmission
Press M, 61 and OK. Use / to select the
document in the waiting queue and confi rm with
Y or OK to immediately perform the selected
fax or SMS transmission.
Cancelling a transmission
Press M, 63 and OK. Use / to select the
document in the waiting queue and confi rm with
OK.
Printing a document
Press M, 64 and OK. Use / to select the
document in the waiting queue and confi rm with
OK.
Print the waiting queue
Press M, 65 and OK. A list of the documents
queuing for transmission will be printed.

Lock

You can block access to the keypad for num-
bers or to the whole keyboard of your MFJ Pro
321.
Locking code
Insert the code that will be needed to temporar-
ily unlock the keyboard.
1 Press M, 711 and OK.
2 Enter the four-digit interlock code and press
OK.
3 Enter the code one more time and press
OK.
When a code is already registered, the ma-
chine asks you fi rst to give the old code before
allowing you to modify it.
Locking the keyboard
The access code must be entered each time
the machine is used.
1 Press M, 712 and OK.
2 Enter the four-digit interlock code and press
OK.
3 Use / to select WITH and press OK.
v After each operation, the machine locks
automatically.
To unlock the keyboard, enter WITHOUT in
step 3.
Locking numbers
You can also just lock the keypad for numbers
with a code. Transmissions are only possible
from numbers included in the directory.
1 Press M, 713 and OK.
2 Enter the four-digit interlock code and press
OK.
3 Use / to select DIRECTORY ONLY and
press OK.
v After each operation, the machine locks
automatically.
To unlock the keyboard, enter FREE in
point 3.

Care and maintenance

Cleaning the machine
Use a soft, fl uff-free cloth lightly moistened with
a little alcohol (96%). Do not allow any moisture
to enter the machine.
Cleaning the scanner glass
1 Open the scanner without pressing the but-
ton.
2 Use a cloth to lightly wipe the scanner glass
(A).
A
3 Close the scanner.
Cleaning and aligning the cartridges
If the quality of printed documents deteriorates,
the cartridges should be cleaned and aligned.
1 Press M, 72111 and OK. The car-
tridge will be cleaned automatically.
2 Press M, 72121 and OK. The ma-
chine will print out a page to check the align-
ment.
VALUE A
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfj pro 321

Table of Contents