Cartridge Capacity; Logs; Commands - Sagem MF J PRO 321 Instructions For Use Manual

3 Open the cartridge holder.
4 Remove the empty cartridge.
5 Take the ink cartridge out of its packaging
and remove the protective strip. Be careful
not to touch the nozzles and the contacts.
6 Insert the cartridge with the contacts forward
and the "nose" down into the cartridge hold-
er - the colour cartridge left and the black
cartridge right.
7 Close the cartridge holder. You will hear a
click when it snaps home.
8 Close the machine.
24
9 Insert the chip card "Plug 'n Print" with the
contacts facing up into the slot below the
control panel to update the cartridge infor-
mation. Press OK.

Cartridge capacity

Press M, 73 and OK. Press / to see the
current capacity of the black and the colour car-
tridges.

Logs

The logs list the last 30 incoming and outgo-
ing transmissions made by your machine. A
report will be automatically printed after every
30 transmissions. However, you may request a
print-out at any time.
Press M, 52 and OK. The logs are printed.

Commands

Your device will fi le all transmission commands
(including faxes ready for polling or for delayed
sending) in a list, the waiting queue.
Consulting or modifying
Documents in the waiting queue may have the
following status:
TX—transmission
DOC—in deposit
POL—polling
TR—ongoing commands
SMS—SMS transmission
Press M, 62 and OK. Use / to select a
document from the waiting queue and confi rm
with OK. Modify the parameters and confi rm
with OK.