Advanced Settings; Settings List; Fax Settings; Sms Settings - Sagem MF J PRO 321 Instructions For Use Manual

Advanced
settings

Settings list

You may print a list of your MFJ Pro 321's pa-
rameter settings to monitor any changes made
to the default parameters!
Press M, 54 and OK.

Fax settings

Reception mode
If you want to receive fax messages with a mo-
dem (with a PC) connected on the same tele-
phone line as the MFJ Pro 321, you must dis-
able automatic fax reception.
Press M, 241 and OK. Use / to choose
MANUAL (to disable automatic reception) or FAX
(to receive faxes on the MFJ Pro 321 automati-
cally).
Memory fax reception ( without paper)
When the paper is fi nished or the cartridges are
empty, faxes will be stored in the memory. You
can disactivate this function.
1 Press M, 242 and OK. Use / to
choose one of the following options:
WITHOUT PAP—faxes will be stored in the
memory if the printer is not available.
WITH PAPER—fax reception will be refused if
the printer is not available.
2 Confi rm with OK.
Number of copies
You may print incoming documents more than
once.
Press M, 243 and OK. Enter a number (1
to 99) and press OK.
Sorted printing
When you receive documents of several pages,
they will be received in the memory and then
printed out in the correct order. You can avoid
this by de-activating sorted printing:
Press M, 244 and OK. Use / to choose
WITH or WITHOUT and press OK.
Sorted sending
Documents of several pages are scanned into
the memory and then sent. You can disable this
function.
Press M, 232 and OK. Use / to choose
WITH or WITHOUT and press OK.

SMS settings

When you select your country when setting
up the MFJ Pro 321, the parameters for SMS
emission and reception will be pre-set. If these
settings do not work or if you want to use an-
other provider, you will need to change these
settings. Your SMS service provider will provide
the numbers you need.
SMS emission
1 Press M, 4611 and OK.
2 Enter the telephone number your machine
has to dial to send SMS messages. Press
OK.
SMS reception
1 Press M, 4612 and OK.
2 Enter the telephone number to receive SMS
messages. Press OK.
SMS alternative reception
You might wish to receive SMS from a sec-
ond provider. In that case you will have to en-
ter a second telephone number to receive SMS
messages.
1 Press M, 4621 and OK.
2 Enter the second telephone number for
SMS reception and press OK.
Automatic printing
Press M, 451 and OK. Use / to choose
whether SMS messages should be printed out
automatically or not and press OK.
Beep
Press M, 452 and OK. Use / to choose
whether the MFJ Pro 321 should emit a beep to
notify you when an SMS message is received
and press OK.
Sender name
Press M, 453 and OK. Use / to choose
whether SMS messages that you send should
include your name. Confi rm with OK. (Enter
the name using function 22)

Scan settings

Flat-bed scanning
M, 271, OK—Resolution
M, 272, OK—Zooming
M, 273, OK—Origin
M, 274, OK—Contrast
M, 275, OK—Saturation
21