Installing A Line Cord Cap - U.k. Only; Vatic Fitter Heads Information - Danmark; Mounting The Fixture - High End Systems SHOWGUN User Manual

CHAPTER 2
Setup and Configuration

Installing a Line Cord Cap - U.K. Only

In the United Kingdom, core colours in the mains lead of this equipment may not correspond
with the colored markings identifying the terminals in the fixture's plug. In that case, install a
line cord cap in accordance with the following code:
• Connect the green and yellow core to the plug terminal marked with the letter "E," or by the
earth symbol
• Connect the blue core to the terminal marked with the letter "N" or coloured black.
• Connect the brown core to the terminal marked with the letter "L" or coloured red.
WARNING:
Class 1 equipment - This equipment must be earthed.

Vatic Fitter Heads Information - Danmark

Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket

Mounting the Fixture

You can mount your SHOWGUN
freestanding on its base.
WARNING!
Equipment suitable for dry locations only. Do not expose this
equipment to rain or moisture.
CAUTION!
Always use a secondary safety cable when mounting this fixture.
Do not mount on a flammable surface or within 1 m (3 ft) of a
flammable object.
Maintain a minimum focus distance of 4 m (13.1 ft) from any flammable
object.
Maintain a minimum focus distance to
3
3 m (9.8 ft)
Note: Due to the wide variety of possible lighting designs, High End
Systems cannot make specific mounting recommendations. Consider
the following procedure as a suggested guideline only.
8
or coloured green, or green and yellow.
® fixture suspended from a support system (such as a truss) or
non-flammable lighted object of
SHOWGUN
eller
® User Manual