Lamp Life Limit; Data Loss Timeout - High End Systems SHOWGUN User Manual

CHAPTER 3
SHOWGUN® Menu System

Lamp Life Limit

Use this menu option to display the warning message Lamp Life Error when the current lamp
hours reach the rated lamp life. When the
tracks the number of hours the lamp is on. At 650 hours, it displays an error message. At 710
hrs., the lamp shuts off, and the fixture will not strike until the lamp is replaced and the lamp
hours are reset to 0. See Replacing the Lamp on page 38 and Lamp HR/Strike Reset on page 27.
To enable the LAMP LIFE LIMIT
1. Press the Menu button to unlock the menu system or to move back up the system to the top
level menus.
2. Using the left and right arrows on the Center button, scroll through the top level to
PARAMETERS MENU
3. Using the left and right arrows on the Center button, scroll to
4. Using the up and down arrows on the Center button, choose the
Enter to select.

Data Loss Timeout

Use this menu option to determine how the fixture will react in the event of DMX data loss. Set
the shutter to stay open until shutdown or to close one second after data loss.
DATA LOSS TIMEOUT
To set the
1. Press the Menu button to unlock the menu system or to move back up the system to the top
level menus.
2. Using the left and right arrows on the Center button, scroll through the top level to
PARAMETERS MENU
3. Using the left and right arrows on the Center button, scroll to
4. Using the up and down arrows on the Center button, choose
until shutdown, or
button to select.
22
parameter:
and press the Enter button to select.
:
and press the Enter button to select.
SHORT
to close the shutter 1 second after data loss and press the Enter
LAMP LIFE LIMIT
parameter is enabled, the fixture
LAMP LIFE LIMIT
.
ENABLE option and press
DATA LOSS TIMEOUT .
LONG
to keep the shutter open
SHOWGUN ® User Manual
SET
SET