Control Settings
The Control parameter activates certain Fixture functions. To access all SHOWGUN
settings (except for Pan & Tilt MSpeed Off), first select a control channel value, then set the
Shutter channel to "0."
NOTE: The Control channel should not be crossfaded.
Control Setting
Safe
Pan & Tilt MSpeed Off
Display Off
Display Bright
Home
Lamp On
Lamp Off
Shutdown
SHOWGUN
®
User Manual
Disables all Control settings for normal operation.
Sets Pan & Tilt MSpeed to ignore MSpeed settings.
Sets display to off.
Brightens the display characters.
Remotely homes the fixture.
Remotely restrikes the fixture's lamp.
Remotely extinguishes the fixture's lamp.
Remotely deactivates the fixture. When a fixture is shut
down, the lamp is extinguished, power to the motors is
disabled, and the LED display reads "
in shutdown mode, you must home the fixture to bring it back
into operation.
Description
SHUT DOWN
CHAPTER 4
Fixture Programming
Control
®
". If a fixture is
35