Sagem IP PHONEFAX 49A User Manual page 23

7 Dial using [ DELETE ENTRY .
8 Confirm using OK.
9 Confirm the deletion with ô Yes .
Changing the ringer tone
Changing the ringer tone
You can assign a separate ring tone to each birthday re-
minder.
1 Press [, and using [ select ACCESSORIES .
2 Confirm with OK.
3 Dial using [ BIRTHDAY .
4 Confirm using OK.
5 Using [ select the entry to which you would like to
assign a new ring tone.
6 Press ô Option .
7 Using [ select RINGER TYPE .
8 Confirm with OK.
9 Select the desired ring tone using [.
10 Confirm with OK.
11 Using [, set the volume.
12 Confirm with OK.
Acoustic room monitoring
Existence of several devices is the prerequisite
This function is available only if you have registered
several cordless telephones with your device and the
telephones are within the range of the machine.
Room monitoring
With this function you can acoustically "monitor" a room
(for example, a children's bedroom).
Setting up room monitoring
Set up the room monitoring on the receiver unit first.
1 On the receiver unit, press [, and using [ select
ACCESSORIES .
2 Confirm using OK.
3 Using [ select ROOM MONITOR. .
4 Confirm using OK.
5 Using [ select the transmitting cordless telephone.
6 Press ô Call .
7 The transmitting unit starts ringing. Press OK to ac-
cept the call.
8 Using ô Yes activate the baby-phone function on
the transmitting unit.
The cordless telephones are now connected to each other
in the monitoring mode. Place the transmitting unit in the
room which you would like to acoustically monitor. Keep
the receiver unit with you.
Room monitoring
If you get a call when you are in the room monitoring
mode, only the device rings. On the cordless tele-
phone, the display gets lit up and a message appears.
Telephone calls during room monitoring
If you get a call when you are in the room monitoring
mode, only the device rings. On the cordless telephone, the
display gets lit up and a message appears.
1 Press ô ACCEPT on the cordless telephone to accept
the call.
2 Press ' to end the call. The cordless telephone returns
to the room monitoring mode.
You can place a call when in the room monitoring mode.
1 Press ô Call and dial the desired number.
2 Press " to make the connection.
3 Press ' to end the call. The cordless telephone returns
to the room monitoring mode.
Ending room monitoring
Press ' on any one of the cordless telephones to end the
room monitoring mode.
23