Table of Contents
Advertisement
4 Select the connection I
and click on P
ROPERTIES
5 Activate U
SE THE FOLLOWING
the IP addresses. For the factory settings of the device,
enter
the
following
192.168.134.10 (IP address of the computer—the first
three parts are fixed, the last number is freely selectable,
may not however correspond with the last number of
the IP address of the device in factory setting 1), S
: 255.255.255.0, D
NET MASK
192.168.134.1 (IP Address of the LAN socket of the
device, see Network Report).
6 Confirm with OK.
30
P
(TCP/IP)
NTERNET
ROTOCOL
.
IP
and enter
ADDRESS
details:
IP
ADDRESS
EFAULT GATEWAY
7 Start an Internet browser on the connected computer.
Enter in the IP address of the device in the address bar
(factory settings: 192.168.134.1).
8 Confirm with R
9 Enter
as user name and password.
USER
Change the password when you call the web in-
terface for the first time, so that there is no unau-
thorised access to your device. Note down your
password in a safe place. Should you forget your
password, you must reset your device to factory
settings, in order to be able to access it again. All
personal settings will be deleted.
10 Confirm with OK. The web interface is called.
Selecting the Voice over IP pro-
vider
VoIP-provider
You must be registered with a Voice over IP provider, who
supports Session Initiation Protocol (SIP), to be able to
make telephone calls and send faxes over Internet.
Saved providers
You can select one of the preset providers on the de-
vice and save personal details. With the web interface
you can set the device for other providers and make
further settings.
1 Press OK, 81 and OK.
2 Using [ select a provider or select manual configura-
tion.
:
3 Confirm using OK.
Entering user name
-
Login name and User name
UB
In addition to the login name – with which you login with
:
your Voice over IP provider – you will also receive a user
name (also SIP address or ID number) for your IP tele-
phone account from your Voice over IP provider. For
some providers, the login name and the user name are
same.
Definition
The SIP address has the same structure as an E-Mail ad-
dress: The user name is separated from the IP address (or
the domain name) of the Voice over IP provider by an @
symbol.
1 Press OK, 82 and OK.
2 Enter the user name of your IP account with your
Voice over IP provider.
3 Confirm using OK.
Entering login name
1 Press OK, 83 and OK.
2 Enter the login name with which you login to your
Voice over IP provider.
3 Confirm using OK.
.
ETURN
Advertisement
Table of Contents
