Table of Contents
Advertisement
Connecting the Telephone Cord
Connecting the Telephone Cable
Connect the telephone cord to the device by inserting it in
the socket designated with LINE (RJ-11-Connector). In-
sert the telephone plug into your telephone connection
socket.
Telefonkabel anschließen
Extension
If you connect your device as extension to a tele-
phone system, you must set it for working as an ex-
tension (also see Chapter "Telephone connections
and additional devices, page 35).
Ireland
Two-pin
When connecting to the telephone line socket, use only a
two-pin RJ-11-telephone cable (modular plug). The use
of a four-pin cable may lead to the machine not function-
ing correctly.
Connecting the Power Cord
Power Type at Setup Location
Check whether the power type of your machine (in-
dicated on the type plate) matches the power type
available at the setup location.
Device power cord
Connecting power cord of the device
Connecting the Power Cable
Insert the power cable into the connection located on the
rear side of the machine. Connect the power cable to the
electrical socket.
Netzkabel anschließen
Charging station power cord
4
Connecting the power cord of the charg-
ing station
Connect the mains cable of the charging station to the
electrical socket.
Connecting the charging station
Initial installation
Starting the Initial Installation
After you connect your device to the mains, the initial in-
stallation commences. Press î. Your device prints a help
page.
Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with OK.
Selecting the Country
Setting the Country Correctly
Always set the country in which you are operating
the machine. Otherwise, your machine is not adapt-
ed to the telephone network. If your country is not
included in the list, you must select a different setting
and use the correct telephone cable for the country.
Consult your retailer.
Setting the Country
1 Use [ to select the country in which you are operat-
ing the machine.
2 Confirm with OK.
After this input, the machine prints another help page and
checks the telephone line.
Entering Your Number
Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
Entering Your Number
1 Enter your number. Using # or * you can enter a
plus sign.
2 Confirm using OK.
Entering name
1 Enter the name using the letter keypad. Enter capital
letters by pressing and holding + button. You can delete
individual characters using \. You can enter a space us-
ing ½. Press CTRL and the respective letter key to en-
ter the special character printed on it.
You can move the cursor with [. You can delete
individual characters with C.
2 Confirm using OK.
Print list of functions
After entering the device prints an overview of the func-
tions.
Advertisement
Table of Contents
