Table of Contents
Advertisement
Connecting the Telephone Cord
Connecting the Telephone Cable
Connect the telephone cord to the device by inserting it in
the socket designated with LINE (RJ-11-Connector). In-
sert the telephone plug into your telephone connection
socket.
EN
Telefonkabel anschließen
PABX Systems 1
If you connect your device as extension to a tele-
phone system, you must set it for working as an ex-
tension (also see Chapter "Telephone connections
and additional devices, page 35).
Ireland
Two-pin
When connecting to the telephone line socket, use only a
two-pin RJ-11-telephone cable (modular plug). The use
of a four-pin cable may lead to the machine not function-
ing correctly.
Connecting the Power Cord
Mains Voltage at Setup Location
Check whether the mains voltage of your device (in-
dicated on the type label) matches the mains voltage
available at the setup location.
Device power cord
Connecting power cord of the device
Connecting the Mains Cable
Insert the mains cable into the connection located on the
rear side of the device. Connect the mains cable to the elec-
trical socket.
Netzkabel anschließen
Charging station power cord
Connecting the power cord of the charg-
ing station
Connect the mains cable of the charging station to the
electrical socket.
Ladestation anschließen
4
Initial installation
Starting Initial Installation
After you connect your device to the mains voltage, the initial in-
stallation commences. Press î. Your device prints a help page.
Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with OK.
Selecting the Country
Setting the Country Correctly
Always set the country in which you are operating the ma-
chine. Otherwise, your machine is not adapted to the tel-
ephone network. If your country is not included in the list,
you must select a different setting and use the correct tele-
phone cable for the country. Consult your retailer.
Setting the Country
1 Use [ to select the country in which you are operat-
ing the machine.
2 Confirm with OK.
After this input, the machine prints another help page and
checks the telephone line.
Entering Your Number
Header
Your name and number are added together with date, time and
page number at the top edge of each fax transmission (= header).
Entering Your Number
1 Enter your number. Using # or * you can enter a
plus sign.
2 Confirm with OK.
Entering name
1 Enter the name using the letter keypad. Enter capital
letters by pressing and holding + button. You can delete
individual characters using \. You can enter a space us-
ing ½. Press CTRL and the respective letter key to en-
ter the special character printed on it.
You can move the cursor using [. Use C to de-
lete individual characters.
2 Confirm using OK.
Entering the Time and Date
Entering Time/Date
1 Enter the time, e.g. 1400 for 2 pm.
2 Enter the date (two digits each) e.g. 080607
for 8 June 2007.
3 Confirm with OK.
Help 2 · Initial Installation Process
You can restart the initial installation process any
time. Press î and 2.
Inserting batteries in cordless tel-
ephone
1 Insert the new batteries in the battery compartment
with the positive and negative poles as shown in the pic-
ture in the battery compartment.
Never use non-rechargeable batteries in the
cordless telephone. Follow the specifications in
the technical data.
Sagem SPFX 40 · 45
Advertisement
Table of Contents
