Group And Priority Scan - Icom IC-41W Instruction Manual

Group and Priority Scan

■
Group and priority scans repeatedly watch a priority chan-
nel while scanning the specified tag channels. This is useful
when waiting for a call on the priority channel.
Group and priority scans behave differently when transmit-
ting. Group scan allows the user to transmit on a busy or
priority channel. Priority scan will only allow transmission on
a priority channel. (or the channel scanning starts ON, if no
priority channel is set)
To initiate a group or priority scan:
Push until group or priority scan is selected.
q
• "
" appears when group scan is selected, and "
when priority scan is selected.
Appears
Group scan is selected.
" appears
Appears
Priority scan is selected.
Set the priority channel by holding down
w
onds while on the desired channel.
•
To cancel the priority channel, push [Top] to enter second func-
tion mode, then push and hold
ting.
Push to start the scan.
e
Group scan starts.
Priority scan starts.
r When receiving a signal, the scan will pause and resume
according to the selected scan resume condition.
t Push to cancel the scan.
6
SCAN
for 2 sec-
to remove the priority set-
Appears
Blinks
Scan start channel
Blinks
Priority channel
6
19