Specifications - Icom IC-41W Instruction Manual

12

SPECIFICATIONS

D General
• Frequency coverage
TX
RX
• Mode
• Channel spacing
CB channel
Private channel
• Current drain (at 7.2 V)
• Power supply requirement : 7.2 V DC nominal*
• Frequency stability
• Antenna impedance
• Dimensions
• Weight
D Transmitter
• Output power
• Modulation system
• Max. frequency deviation : ±2.5 kHz/±5.0 kHz
• Spurious emissions
• Adjacent channel power
• External mic. connector
40
: 450–480 MHz
(includes all 80 CB channels)
: 450–520 MHz
: 8K50F3E/16K0F3E
: 12.5 kHz
: 12.5/25 kHz
: TX (at 5 W) 1.9 A
Max. audio 300 mA max.
(negative ground)
*Specified Icom's battery pack only
: ±2.5 ppm (–30°C to + 60°C)
: 50 Ω nominal
: 53.0(W) × 120(H) × 37(D) mm
(Projections not included)
:
Approx. 310 g (including BP-232WP)
: 5 W
: Variable reactance frequency
modulation
: 70 dB (min)
: 68 dB/75 dB (typical)
: 3-conductor 2.5 (d) mm/2.2 kΩ
D Receiver
• Receive system
• Sensitivity (12 dB SINAD)
• Squelch sensitivity
• Intermodulation rejection ratio : 74 dB (typical)
• Spurious response rejection ratio: 70 dB (min)
• Adjacent channel selectivity
• Audio output power
• External speaker connector
All stated specifications are subject to change without
notice or obligation.
: Double conversion
superheterodyne
: 0.25 µV (typical)
: 0.25 µV (typical; Threshold)
: 65 dB/75 dB (typical)
: 0.5 W (typical) at 5% distor-
tion with an 8 Ω load
: 2-conductor 3.5 (d) mm/8 Ω