Dbattery Pack; Dchargers; Dbelt Clips; Ddc Cables - Icom IC-41W Instruction Manual

D BATTERY PACK
Battery pack Voltage
2250 mAh (min.)
BP-232WP
7.4 V
2300 mAh (typ.)
* When the power save function is turned ON, and the operating
periods are calculated under the following conditions;
TX : RX : standby = 5 : 5 : 90
D CHARGERS
• BC-119N + AD-106
desktop charger
+ BC-145SV
ac adapter
For rapid charging of battery packs. An AC adapter is supplied with
the charger.
Charging time: approximately 3.5 hours.
• BC-121N - + AD-106
multi charger
+ BC-157S
ac adapter
For rapid charging of up to 6 battery packs (six AD-106's are required)
simultaneously. An AC adapter should be purchased separately.
Charging time: approximately 3.5 hours.
• BC-160 + BC-145SV
desktop charger
For rapid charging of battery packs. An AC adapter is supplied with
the charger.
Charging time: approximately 3.5 hours.
D BELT CLIPS
• MB-93
swivel belt clip
• MB-94
belt clip
Exclusive alligator-type belt clip.
• MB-96N/96F
leather belt hanger
Capacity Battery life*
15.0 hrs.
charger adapter
(6 pcs.)
charger adapter
ac adapter
D DC CABLES
• CP-23L
cigarette lighter cable
Allows charging of the battery pack through a 12 V cigarette lighter
socket. (For BC-119N/BC-160)
• OPC-515L/OPC-656
dc power cables
Allows charging of the battery pack using a 13.8 V power source
instead of the AC adapter.
OPC-515L : For BC-119N/BC-160
OPC-656 : For BC-121N
D OTHER OPTIONS
• HM-168LWP -
speaker microphone
Combination speaker-microphone that provides convenient opera-
tion while hanging the transceiver from your belt.
• FA-SC72U
antenna
470–520 MHz
• FA-SC73US
stubby antenna
450–490 MHz
• AD-98FSC
antenna connector adapter
• CS-41S + OPC-478UC
cloning software
Provide quick and easy programming of such settings as RX fre-
quencies and Set modes contents.
• MB-130
vehicle charger bracket
Mounts the BC-160 desktop charger on to variety of place in ve-
hicle.
Approved Icom optional equipment is designed for optimal perfor-
mance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an Icom
transceiver in the event the Icom transceiver is used with equipment
that is not manufactured or approved by Icom.
11
OPTIONS
11
cloning cable
39