Unit Description; Front Panel - Icom IC-41W Instruction Manual

Front panel

■
q
w
e
r
t
q ANTENNA CONNECTOR
Connects the supplied antenna.
w TOP KEY [TOP]
Toggles Normal (N), Function (F) and Set (S) modes.
In Normal mode
Push to turn Function mode ON. ("F" is displayed)
➥
Push and hold for 2 seconds to enter set mode (p. 11).
➥
In Function mode
Push to return to Normal mode.
➥
When a receive channel is selected (once enabled),
➥
push and hold for 2 seconds to enter RX VFO (receive
frequency select) mode. (p. 29)
NOTE : After 30 seconds in Function mode with no opera-
tion, unit will return to Normal mode.
y
u
Speaker
Microphone
i
o !0 ! 1 !2

UNIT DESCRIPTION

e SIDE1 KEY [Side1]
In Normal mode
Push to toggle the monitor (open tone squelch) func-
➥
tion ON or OFF. (p. 10)
Push and hold for 2 seconds to activate the following
➥
functions in order:
• Tone squelch (only receive calls with same tone squelch
code). "T SQL "appears. (p. 21)
• Pocket beep (informs that a call was missed). "T SQL ë"
appears. (p. 21)
• No tone operation. "T SQL ë" disappears.
In Function mode
Push to enter squelch setting mode, then push [CH Up]
➥
or [CH Down] to set the squelch level. (p. 10)
Push and hold for 2 seconds to turn the ATS (Auto-
➥
matic Transponder System) function ON or OFF.
(p. 28)
r PTT SWITCH [PTT] (p. 9)
Push and hold to transmit. Release to receive.
➥
A PTT hold function is also available. See page 30 for
➥
more information.
t CH UP/CH DOWN KEYS
y VOLUME CONTROL
Rotate to turn power ON or OFF and set operating volume.
u EXTERNAL SPEAKER JACK
Connect an optional speaker microphone. Ensure power is
OFF before connecting external devices.
2
1 1
2
3