Group And Priority Scans - Icom IC-440 Instruction Manual

5
SCAN OPERATION

■ Group and priority scans

Group and priority scans repeatedly watch a priority chan-
nel while scanning specified channels. This is useful when
waiting for a call on the priority channel or several specified
channels.
Group and priority scans behave differently when transmit-
ting. Group scan can transmit on a priority channel or busy
channel, and priority scan can only transmit on a priority
channel.
q Push
O G P (Scan Mode)
RS
priority scan. (p. 22)
• " " appears when the group scan is selected, and "
pears when the priority scan is selected.
Appears
Group scan is selected.
w Set the priority channel if desired when the priority scan
type is selected in step q. (p. 17)
• When the priority channel is not set, scan start channel is moni-
tored during the priority scan.
24
several times to select the group or
Appears
Priority scan is selected.
e Push
SCAN
(Scan)
TAG
Group scan starts.
" ap-
Priority scan starts.
r When receiving a signal, the scan pauses and resumes
according to the selected scan resume condition. (p. 23)
t Push
SCAN
(Scan)
TAG
Appears
to start the scan.
Blinks
Scan start channel
Blinks
Priority channel
to cancel the scan.