D Belt Clip; D Jack Cover; Accessories - Icom IC-41W Instruction Manual

1

ACCESSORIES

D Belt Clip
To attach the belt clip:
Release the battery pack if it is attached.
q
Slide the belt clip in the direction of the arrow (see below)
w
until a 'click' sound is heard.
To detach the belt clip:
Release the battery pack if it is attached.
q
Pinch to lift the clip at
w
out of the holding bracket. (w)
w
q
2
q (see below) and slide the belt clip
D Jack cover
To attach the jack cover:
q Attach the jack cover to the [MIC/SP] jack.
w Tighten the screws.
CAUTION:
Attach the jack cover when the op-
•
tional speaker-microphone is not
used.
• Use the supplied screws only.
To detach the jack cover:
q Unscrew the screws using a phillips
screwdriver.
w Detach the jack cover for the speak-
er-microphone.
[MIC/SP] jack
w
q
Jack cover
q
w
q