Run Vgabios If S3 Resume - Albatron KM400T-8X Pro User Manual

Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has "hung." Options: Delay 4 Sec, Instant-Off (default).

Run VGABIOS if S3 Resume

Select whether you want to run VGABIOS when the system wakes up from the S3 resume function.
Options: Auto (default)、Yes、No
Wake Up Control
If you highlight the "Wake Up Control" label and then press the enter key, it will display a submenu
with the following options:
PWRON After PWR-Fail
This option determines whether you want to restart the system after a power failure. Select "On", to
boot the system whether or not the system was on before power failure. Choose Former-Sts, to
restore the system to the status before the power failure.
Options: Off (default)、On
PS2KB Wake Up Select
Use this option to configure the PS2 keyboard Wake Up feature.
"Password" Use this selection to force the user to enter a password after the system awakens
from PS2 keyboard activity.
"Hot Key" Use PS2KB key to awake the system. See "PS2KB Wake Up from S3-S5" to
configure the hotkey.
PS2KB Wake Up from S3/S4/S5
This option is used when "PS2KB Wake Up Select" is configured as "HOT KEY".
Options: Disable (default), Ctrl+F1(to F12), Power, Wake, Anykey.
Power Button Lock
This item allows you to lock the power button. Options: Enabled (default)、Disabled
USB Wake Up
This item allows you to select USB devices to awaken the system from suspend mode.
Options: Disabled (default)、Enabled
KM400T-8X Series
38