CyberData 11030 Operation Manual page 28

Installing the VoIP Indoor Intercom 22
Parts List
Table 2-5. Device Configuration Parameters
Web Page Item Description
Link to the Update Firmware page.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Test Audio button to do an audio test.
Generates a voice message for testing the Intercom audio
quality and volume.
Click on the Test Relay button to do a relay test.
Click on the Reboot button to reboot the system.
3. After changing the parameters, click the Save button.
Operations Guide 930260E CyberData Corporation