CyberData 11030 Operation Manual page 31

Web Page Item
3. After changing the parameters, click Save Settings. This updates the changed parameters and
reboots the Intercom if appropriate.
4. Connect the Intercom to the target network.
5. From a system on the same network as the Intercom, open a browser with the new IP address of
the Intercom.
Operations Guide
Table 2-6. Network Configuration Parameters
Description
Link to the Networking page.
Link to go to the SIP Configuration page.
Link to the Sensor Configuration page.
Link to the Audio Configuration page.
Link to the Update Firmware page.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
930260E
Installing the VoIP Indoor Intercom
Parts List
CyberData Corporation
25