CyberData 11030 Operation Manual page 36

Voip indoor intercom
Hide thumbs Also See for 11030:
Table of Contents

Advertisement

2.3.4.2 Delayed DTMF
On the SIP Configuration page the dial out extension now supports the addition of comma
delimited pauses and sending additional DTMF tones (using rfc2833). The first comma will pause
three seconds after a call is first established with a remote device. Subsequent commas will pause for
2 seconds. A pause of one second will be sent after each numerical digit.
Extension String
302
302,2
302,25,,,4,,1
Note
Operations Guide
Table 2-8. Examples of Dial-Out Extension Strings
Resulting Action
Dial out extension 302 and establish a call
Dial out extension 302 and establish a call, wait 3 seconds then send the
DTMF tone '2'
Dial out extension 302 and establish a call, wait 3 seconds then send the
DTMF tone '2', send out DTMF tone 5, wait 6 seconds, send out DTMF
tone 4, wait 4 seconds, send out DTMF tone 1
The maximum number of total characters in the dial-out field is 25.
930260E
Installing the VoIP Indoor Intercom
Parts List
CyberData Corporation
30

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 11030 and is the answer not in the manual?

Table of Contents