Specifying Netware Print Services - Canon imagePROGRAF iPF8400 User Manual

iPF8400
3
Press ▲ or ▼ to select Interface Setup, and then press the OK button.
4
Press ▲ or ▼ to select NetWare, and then press the OK button.
5
Press ▲ or ▼ to select NetWare, and then press the OK button.
6
Press ▲ or ▼ to select On, and then press the OK button.
The display reverts to the NetWare menu.
7
Press ▲ or ▼ to select Frame Type, and then press the OK button.
8
Press ▲ or ▼ to select the frame type to use, and then press the OK button.
The display reverts to the NetWare menu.
9
Press ▲ or ▼ to select Print Service, and then press the OK button.
10
Press ▲ or ▼ to select the desired print service, and then press the OK button.
The display reverts to the NetWare menu.
11
Press the Menu button.
If you have changed any settings, a confirmation mes-
sage is displayed. In this case, press the OK button.
•
Be sure to complete step 11. This will activate the values you have entered.
Important
•
If an error message is displayed, check the settings and correct any invalid values.
•
Note To cancel this process, press the Back button.

Specifying NetWare Print Services

Specifying NetWare Print Services
Before printing in a NetWare network, you must configure print services such as print servers, print queues, and so on.
You can configure the print service settings from a computer using any of the following Novell software provided with
NetWare.
• NWADMIN
• PCONSOLE
•
If you use NWADMIN to configure the print service settings, Novell Client (the Novell NetWare client software) must be in-
stalled as the client software application.
Important
•
NetWare networking is unsupported in Windows Vista, Windows Server 2008 and Windows 7.
This topic gives instructions for configuring NetWare print services. The order of this procedure may vary depending on
the environment.
User's Guide
Specifying NetWare Print Services
721