Cannot Feed Paper; Cannot Cut This Paper; End Of Paper Feed; Rel Lever Is In Wrong Position - Canon imagePROGRAF iPF8400 User Manual

iPF8400

Cannot feed paper.

Cannot feed paper.
Cause
Paper could not be 1.
advanced correctly
during feeding.
2.
3.
4.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")

Cannot cut this paper.

Cannot cut this paper.
Cause
There are sheets left on the Ejec-
tion Guide.
There is a foreign object by the
Output Tray, obstructing the Cut-
ter Unit.
You are not using the printer un-
der the recommended environ-
mental conditions for the paper.
You are using paper that is not
compatible with automatic cut-
ting.
In other cases, the Cutter Unit
may be damaged.

End of paper feed.

End of paper feed.
Although an attempt was made to advance the paper manually, it reached the limit position
that can be advanced.
Paper can be retracted only up to 17 mm (0.7 in) when using the Media Take-up Unit.

Rel lever is in wrong position.

Rel lever is in wrong position.
Cause
The Release Lever is up. Lower the Release Lever.
User's Guide
Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
Load paper.
Lower the Release Lever.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
1.
Lift the Release Lever and remove the paper.
2.
Load paper.
3.
Lower the Release Lever.
4.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.")
1.
Lift the Top Cover and remove the foreign object.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
Use the printer only where the recommended environmental conditions for the paper are met. Note that
various environmental conditions are recommended for various types of paper. For details on the recom-
mended environmental conditions, see the Paper Reference Guide.
(See "Paper Reference Guide.")
1.
Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll.
(See "Specifying the Cutting Method for Rolls.")
For information about paper that is compatible with automatic cutting, see the Paper Reference Guide.
(See "Paper Reference Guide.")
2.
Lift the Release Lever and remove the paper.
Contact your Canon dealer for assistance.
Cause
Corrective Action
Corrective Action
→
P.958
→
P.961
→
P.539
→ P.561
Corrective Action
→
P.539
→
P.552
Cannot feed paper.
Corrective Action
Canceling manual advancing.
(See "Feeding Roll Paper Manually.")
Canceling manual advancing.
→
P.549
999