Other Messages; Garo Wxxxx (X Represents A Number); Error Exxx-Xxxx (X Represents A Letter Or Number); Hardware Error. Xxxxxxxx-Xxxx (X Represents A Letter Or Number) - Canon imagePROGRAF iPF8400 User Manual

GARO Wxxxx (x represents a number)

Other Messages

Other Messages
GARO Wxxxx (x represents a number) ...................................................................................................................... 1012

ERROR Exxx-xxxx (x represents a letter or number) ........................................................................................... 1012

Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ................................................................ 1012

Top cover is open. .............................................................................................................................................................. 1012

Prepare for parts replacement. .................................................................................................................................... 1013
Parts replacement time has passed. .......................................................................................................................... 1013
Unknown file. ......................................................................................................................................................................... 1013
Calibration There is a problem with the multi-sensor. ........................................................................................ 1013
Multi-sensor error ............................................................................................................................................................... 1013
GARO Wxxxx (x represents a number) GARO Wxxxx (x represents a number)
Cause
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job. The paper was
not advanced because the trailing edge is taped to the roll.
Fastening tape or the Belt Stopper has not been removed inside the Top
Cover.
An error requiring service may have occurred.
Top cover is open.
Top cover is open.
1012
The printer has detected that the Top Cover is open.
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Cause
Write down the error code and message, turn off the printer, and contact your Canon dealer for
assistance.
Cause
Cause
Corrective Action
Corrective Action
Turn off the printer and remove the roll from the printer before re-
storing power.
Turn off the printer, open the Top Cover and remove the tape or the
Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds before restoring
the power.
If the message is displayed again, write down the error code and
message, turn off the printer, and contact your Canon dealer for as-
sistance.
Open the Top Cover fully, remove any foreign objects, and close the Top Cover again.
If the error occurs again, turn off the printer and wait a while before restoring power.
Corrective Action
Corrective Action
iPF8400
User's Guide