Canon imagePROGRAF iPF8400 User Manual page 499

iPF8400
6
In Shadow, drag the slide bar toward Light.
•
You can change the numbers by inputting in numerical characters.
•
You can change the numbers by clicking either ▲ button or ▼ button.
Note
7
Click the Curves button then click near the center of the curve.
8
Enter 120 in Input and 135 in Output then click the OK
button.
9
Click the Print button.
This applies the image adjustments and starts the print job.
User's Guide
Adjust the Colors while Checking the Preview (for Monochrome)
499