Preview Area - Canon imagePROGRAF iPF8400 User Manual

Preview Area

Preview Area

Preview Area
You can check the settings you made on the image in this area.
• Preview
Select the preview display method.
For more information about preview, see "Utilize Three Types of Previews."
Print Area Layout
Image
Roll Paper Preview
• Print Selected Range
Place a checkmark here to only print the selected range.
•
When you select Preview in the Image, then select a portion of the image on the preview display, this becomes valid.
Note
• Perform Proof in Preview
Place a checkmark here to simulate the colors of the output product in the preview.
•
If Auto (Color) is selected under Output Profile, some media types are enabled.
•
If ICC profile is selected under Output Profile, this is always enabled.
Note
•
The actual color balance of the print product and the simulation product may differ with some environments and condi-
tions. In addition, when you have selected an ICC Profile with Output Profile and it is not compatible with the printer or
media that you are using, the color balance of the actual print product will differ.
472
• Image Properties button
When you click the button to open the Image Properties dialog box, where Image Size, Resolution, Bit and
Color Space information of the image imported to Print Plug-In are displayed.
Setting
Displays the print range and the area out of the print range in the layout matching the Paper Size
set.
*You can change the image print position when you drag the image while the cursor is displayed
as
The entire image is displayed.
*You can select the print range when you drag the image while the cursor is displayed as
*When you click the image while the cursor is displayed as
Display the media size and roll paper information on the top in the layout printing on roll paper.
*To select Roll Paper Preview, select Roll Paper in Paper Source.
.
→
P.493
Details
, the selected area is deselected.
iPF8400
.
User's Guide