iPF8400
Printing does not start
Printing does not start
The Data lamp on the Control Panel does not light up ........................................................................................ 967
The printer does not respond even if print jobs are sent ................................................................................... 967
Ink Filling.. is displayed ........................................................................................................................................................ 967
The display screen indicates Agitating... ..................................................................................................................... 967
The Data lamp on the Control Panel does not light up
The Data lamp on the Control Panel does not light up
Cause
The printer is not on.
The target printer was not
selected when printing.
The print job is paused.
The printer does not respond even if print jobs are sent
The printer does not respond even if print jobs are sent
In the Control Panel menu, Pause Print is On.
You have selected Save in mail box in Output Method on the
printer.
Print jobs are pending.
Ink Filling.. is displayed
Ink Filling.. is displayed
Cause
The printer was forced off during operation.
The display screen indicates Agitating...
The display screen indicates Agitating...
Cause
Ink agitation is in pro-
gress.
User's Guide
Make sure the power cord is securely plugged in, all the way. Press the Power button to turn on the printer.
In Windows, select the printer by clicking Select Printer or Printer in the printing dialog box and try printing
again.
In Mac OS X, open the dialog box of the printer driver, select the printer from the list of Printer, and try printing
again.
In Windows, restart the print job as follows.
1.
Select the printer icon in the Printers and Faxes (or Printers) window.
2.
Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1.
Click Print & Fax. (This is identified as Printer Setup Utility or Print Center in other versions of Mac OS
X.)
2.
Select the printer, and then Resume Printer (or Start Jobs) in the Printers menu to restart the print job.
Cause
Wait until the system has been filled with ink. This process may take about nine minutes.
Please wait until ink agitation is finished.
The time for agitation varies depending on how long the printer was off. (Between about a minute and a half to
twenty minutes.)
The Data lamp on the Control Panel does not light up
Corrective Action
Corrective Action
Set Pause Print to Off.
(See "Pausing Printing.")
→
P.36
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.")
→
P.769
Manage the jobs on hold and print as needed.
(See "Managing Pending Jobs (Printing or Deleting Jobs on Hold).")
Corrective Action
Corrective Action
→
P.767
967