Clearing A Jammed Sheet - Canon imagePROGRAF iPF8400 User Manual

iPF8400
7
Hold the edge of the roll paper in the middle as you
gently pull it evenly to the position of the Ejection Guide
(a). Align the right side of the roll paper with the Paper
Alignment Line (b), keeping this side parallel to the line,
and then lower the Release Lever.
•
Do not force the roll paper into alignment with the Paper Alignment Line (b). This may prevent the paper from being
advanced straight.
Important
8
Close the Top Cover.
9
Turn the printer on. (See "Turning the Printer On and Off.")
The roll is advanced and the printer is ready to print.
•
For a neater edge, press the Cut button, select Yes, and cut the edge.
(See "Specifying the Cutting Method for Rolls.")
Note

Clearing a Jammed Sheet

Clearing a Jammed Sheet
If a sheet jams, follow the steps below to remove it.
1
Turn the printer off. (See "Turning the Printer On and Off.")
User's Guide
→ P.23
→
P.552
→
P.23
Clearing a Jammed Sheet
961