The Contrast Becomes Uneven During Printing; The Length Of Printed Images Is Inaccurate In The Feeding Direction - Canon imagePROGRAF iPF8400 User Manual

iPF8400
6
Using the back of the Cleaning Brush, move the Switch to the side opposite ●, corresponding to the size of the
paper for printing.
In this case, note that you will move the switch in the opposite direction from the direction in step 4.
• The Switch only moves number 1 and the number that matches
the paper size. Set all of the switches where the number does
Note
not match the paper size in switches number 2 and higher to
the ● side.
7
Close the Top Cover.

The contrast becomes uneven during printing

The contrast becomes uneven during printing
Cause
The paper feed amount is out of adjustment.
The type of paper specified in the printer driver
does not match the type loaded in the printer.

The length of printed images is inaccurate in the feeding direction

The length of printed images is inaccurate in the feeding direction
Cause
In the Control Panel menu, Adj. Priority is set to
Print Quality.
The type of paper specified in the printer driver
does not match the type loaded in the printer.
User's Guide
Adjust the feed amount.
(See "Adjusting the Feed Amount.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
Set Adj. Priority to Print Length in the Control Panel menu, and then execute Adjust
Length.
(See "Adjusting the Feed Amount.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
The contrast becomes uneven during printing
Corrective Action
→
P.811
→
P.539
→
P.561
Corrective Action
→
P.811
→
P.539
→
P.561
977