Borderless Printing By Resizing Originals To Fit The Roll Width (Windows) - Canon imagePROGRAF iPF8400 User Manual

Large format printer
Hide thumbs Also See for imagePROGRAF iPF8400:
Table of Contents

Advertisement

iPF8400
When printing without borders, be certain to set the blue switch on the platen to the ● side. If the switch is set incorrectly,
print quality may deteriorate. (See "Setting the Blue Switch on the Platen.")
Important
Borderless printing is not possible if details such as crop marks and margins are included as data on the periphery of the
original.
If the length of the image to print is short, then since the roll paper is fed out to a prescribed length before cutting in order to
prevent cutting problems and ejection problems, the trailing edge of the roll paper might not be printed borderless.
These features cannot be used in combination with borderless printing: special page layouts, centering originals, and printing
cut lines on rolls.
If Fit Paper Size or Print Image with Actual Size (Windows only) is selected while performing borderless printing, Rotate
Page 90 degrees (Conserve Paper) cannot be selected. Note that if borderless printing is possible, then even if the original
is rotated 90 degrees, it will be printed by automatically rotating the page by 90 degrees.
Choose the method of borderless printing that suits the original, as desired.
Scale to fit Roll Paper Width
Enlarge or reduce the original as a whole to match the roll paper width.
You can combine this function with rotating pages 90 degrees before printing so that the original width (relative to por-
trait orientation) matches the roll paper width in borderless printing.
Note
For instructions on borderless printing of photos, images, and other documents to match the roll paper width, refer
to the following topics, as appropriate for your computer and operating system.

Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)

Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)

Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)
This topic describes how to enlarge originals before borderless printing to match the roll width, based on the following
example.
When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the edges.
If you require higher image quality, select No from the Automatic Cutting list in the Roll Paper Options dialog box. In this
Important
case, the paper can be printed without borders on the left and right sides only. Once printed and cut, please cut the upper
and lower bands with scissors.
Document: Any type
Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)
Paper: Roll
Paper type: Canon Heavyweight Coated Paper
User's Guide
Borderless Printing by Resizing Originals to Fit the Roll Width (Windows)
P.974
P.105
P.108
105

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents