Table of Contents
Advertisement
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the
boot-up process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up
procedure. If a fatal error occurs, you should consult with your system manufac-
turer for possible repairs.
Beep Code
1 beep
5 short beeps, 1 long
beep
8 beeps
1 continuous beep
(with the front panel
OH LED on)
Appendix A: BIOS Error Beep Codes
Appendix A
BIOS Error Beep Codes
Error Message
Description
Refresh
Circuits have been reset.
(Ready to power up)
Memory error
No memory detected in the
system
Display memory
Video adapter missing or with
read/write error
faulty memory
System Overheat
1 continuous beep with the
front panel OH LED on
A-1
Advertisement
Table of Contents
