Appendix A Bios Error Beep Codes - Supero FatTwin F617R3-FT User Manual

Table of Contents

Advertisement

During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the
boot-up process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up
procedure. If a fatal error occurs, you should consult with your system manufacturer
for possible repairs.
These fatal errors are usually communicated through a series of audible beeps. The
numbers on the fatal error list (on the following page) correspond to the number
of beeps for the corresponding error. All errors listed, with the exception of Beep
Code 8, are fatal errors.
A-1 AMIBIOS Error Beep Codes
Beep Code
Error Message
1 beep
Refresh
5 short beeps and 1
Memory error
long beep
5 long and 2 short
Display memory
beeps
read/write error
1 continuous beep
System overheat
Appendix A
BIOS Error Beep Codes
Description
Circuits have been reset (Ready to power up)
No memory detected in the system
Video adapter missing or with faulty memory
System overheat
A-1
Appendix A: BIOS Error Beep Codes

Advertisement

Table of Contents
loading

Table of Contents