Roll Paper Options Dialog Box - Canon imagePROGRAF iPF9400S User Manual

Roll Paper Options Dialog Box

• Black Point Compensation
Check this check box to perform black point compensation. Loss of gradation in dark areas can be improved by
performing black point compensation.
•
This can be used if Adobe CMM is selected as the Conversion Engine.
Note
• Proof Options
Configures settings related to printing press simulation.
The proof options consist of the following settings.
Simulate Paper Color

Roll Paper Options Dialog Box

Roll Paper Options Dialog Box
This dialog box appears when you click the Roll Paper Options button on the Page Setup Sheet. You can set the roll
paper width and perform the auto cut settings.
• Roll Paper Width
This selects the width of the roll media set to the printer.
• Automatic Cutting
You can set the printer to cut roll paper automatically or print a guideline for cutting.
The following settings are available for automatic cutting.
Available
None
Print Cut Guideline
• No Spaces at Top or Bottom (Conserve Paper)
When you place a checkmark here, the print data is printed without margins.
490
Setting
Select this when performing paper color simulation.
Setting
Each page is automatically cut after it is printed.
Each page is not cut after it is printed and printing continues without interruption.
A print cut guideline is printed after each page and printing continues without interruption.
Details
Details
iPF9400S
User's Guide