View Settings Dialog Box For The Printing Application - Canon imagePROGRAF iPF9400S User Manual

iPF9400S
Setting Item
Printer Default
5 mm (0.2 in)
20 mm (0.8 in)
F
Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automatic
cutting is used.
Setting Item
Printer Default
High Speed
Standard
Low Speed
H
Calibration Value
You can specify whether to apply the results of calibration performed on the printer to image processing.
Setting Item
Printer Default
Enabled
Disabled
G
Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image with
the left and right sides inverted.

View Settings Dialog Box for the Printing Application

View Settings Dialog Box for the Printing Application

In the View Settings dialog box, you can check details of the selected printing application.
User's Guide
The setting of the control panel of the printer is applied.
The document is printed in the standard size.
* Select this when you do not have any problems in printing.
Select this when rubbing against the printhead occurs such as when using paper that tends to
curl.
The setting of the control panel of the printer is applied.
When the Standard setting does not result in cutting the surface cleanly, select this.
Select this when you do not have any problems in automatic cutting.
This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you select it
when using adhesive paper.
The setting of the control panel of the printer is applied.
Print using the calibration results.
Print without using the calibration results. Select this to avoid the changing of the color of images
during printing by color calibration.
View Settings Dialog Box for the Printing Application (Windows)
Details
Details
Details
193