Canon imagePROGRAF iPF9400S User Manual page 376

Paper Detailed Settings Dialog Box (Mac OS X)
Setting Item
Low Speed
H
Automatic Cutting
Set whether to perform roll cutting automatically or print a cut line.
The following settings are available for automatic cutting.
Setting Item
Printer Default
None
Print Cut Guideline
I
Calibration Value
You can specify whether to apply the results of calibration performed on the printer to image processing.
Setting Item
Printer Default
Enabled
Disabled
J
Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image with
the left and right sides inverted.
K
Extend print pass
Uneven printing that occurs when printing with the Highest quality check box selected in Print Quality may be im-
proved by selecting this check box. However, this also reduces the printing speed.
376
This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you select it
when using adhesive paper.
The setting of the control panel of the printer is applied.
After printing completes, the roll is not cut per page, and the next page of data is printed succes-
sively.
After printing completes, a line is printed per page, and the next page of data is printed succes-
sively.
The setting of the control panel of the printer is applied.
Print using the calibration results.
Print without using the calibration results. Select this to avoid the changing of the color of images
during printing by color calibration.
Details
Details
Details
iPF9400S
User's Guide