Canon imagePROGRAF iPF9400S User Manual page 855

Hide thumbs Also See for imagePROGRAF iPF9400S:
Table of Contents

Advertisement

iPF9400S
13
Push the Carriage Cover down toward the front.
14
Close the Top Cover.
Ink now fills the system. It takes about 13 minutes for
ink to fill the system.
While ink is being filled, definitely do not remove the Ink Tank or Maintenance Cartridge. Ink may leak out.
Important
The procedure is now finished if you have set Rep.P.head Print to Off in the Control Panel menu.
In this case, execute Initial adjustmt in Head Posi. Adj. in the Control Panel menu.
Note
(See "Adjustment When Installing the Printhead.")
15
Feed paper by following the instructions on the Display Screen.
After the paper has advanced, Initial adjustmt in Head Posi. Adj. is executed automatically.
When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing paper, set the optimal
Printhead height before aligning the printhead.
Note
(See "Enhancing Printing Quality.")
User's Guide
→P.810
→P.804
Replacing the Printhead
855

Advertisement

Table of Contents
loading

Table of Contents